How to use:

For basic use, follow these simple steps:

  1. Attach the drill bit firmly into the drill head and lock it in place.
  2. Connect the nail drill with the power supply in the "DC INPUT" hole.
  3. Connect the handpiece with the power control device in the "MOTOR" hole and press ON/OFF to turn on the machine.
  4. Rotate the circular speed controller to accelerate or decelerate.
  5. Change rotation direction of grinding drill bit on the sliding F/R button if needed.
  6. After polishing is finished, please rotate the spindle and take out the drill bit.

Note:  
Handpiece and the power cord should be inserted tightly in the "Motor" and "DC iNPUT" hole.